ATE Instruments
The NW-ATE series is an economical and rugged noise instrument suitable for many
applications. Applications for this instrument include system and component wireless
testing, signal simulation, 10GigaBit Ethernet, HDTV and CATV testing as well as use
as a general purpose test source and as an economical source for bit error rate testing.
Specifications:
Output:
White Gaussian Noise
Impedance:
50 Ohms
Output Connector:
SMA female
Noise Attenuator:
127 dB overall in 1 dB steps
Control:
Local, Ethernet, and IEEE-488
Operating temperature:
-20ºC to +75ºC
Size:
17 x 5.25 x 12.5 inches (3U EIA Rack)
Model Number
Frequency
Output (dBm)
Flatness
OPTIONS
BNC: BNC jack output connector
N: N female output connector
75: 75 Ohm impedance
SW: Switch up to 4 Noise Bands
C: Combiner for input signal (6 dB loss signal and noise)
RS: RS232 in addition to Standard IEEE-488
0.1N: Additional 0.1 dB Noise step attenuator 127.9 dB (79.9dB for 18 and 40 GHz)
SA: 127 dB (79dB for 18 and 40 GHz) Signal attenuator in 1 dB steps
0.1S: Additional 0.1 dB Signal step attenuator 127.9 dB (79.9dB for 18 and 40 GHz)
DC: DC coupled signal path
NW100M-ATE
1MHz-100MHz
+13
+/- 0.75 max
NW300M-ATE
1MHz-300MHz
+10
+/- 1.0 max
NW500M-ATE
1MHz-500MHz
+10
+/- 1.0 max
NW1G-ATE
1MHz-1GHz
+10
+/- 1.5 max
NW1.5G-ATE
1MHz-1.5GHz
+10
+/- 1.5 max
NW2G-ATE
1MHz-2GHz
0
+/- 2.0 max
NW3G-ATE
10MHz-3GHz
0
+/- 2.5 max
NW4G-ATE
10MHz-4GHz
-10
+/- 2.5 max
NW6G-ATE
10MHz-6GHz
-10
+/- 2.5 max
NW10G-ATE
10MHz-10GHz
-10
+/- 2.5max
NW18G-ATE
2GHz-18GHz
-14
+/- 2.5max
NW40G-ATE
2GHz-40GHz
-20
+/- 4.0 max
Download Spec Sheet
The NW-ATE series is an economical and rugged noise instrument suitable for many applications. Applications for this instrument include system and component wireless testing, signal simulation, 10GigaBit Ethernet, HDTV and CATV testing as well as use as a general purpose test source and as an economical source for bit error rate testing. |
---|
Specifications: | |
---|---|
Output: |
White Gaussian Noise |
Impedance: |
50 Ohms |
Output Connector: |
SMA female |
Noise Attenuator: |
127 dB overall in 1 dB steps |
Control: |
Local, Ethernet, and IEEE-488 |
Operating temperature: |
-20ºC to +75ºC |
Size: |
17 x 5.25 x 12.5 inches (3U EIA Rack) |
Model Number | Frequency | Output (dBm) | Flatness | ||
---|---|---|---|---|---|
OPTIONS BNC: BNC jack output connector N: N female output connector 75: 75 Ohm impedance SW: Switch up to 4 Noise Bands C: Combiner for input signal (6 dB loss signal and noise) RS: RS232 in addition to Standard IEEE-488 0.1N: Additional 0.1 dB Noise step attenuator 127.9 dB (79.9dB for 18 and 40 GHz) SA: 127 dB (79dB for 18 and 40 GHz) Signal attenuator in 1 dB steps 0.1S: Additional 0.1 dB Signal step attenuator 127.9 dB (79.9dB for 18 and 40 GHz) DC: DC coupled signal path |
|||||
NW100M-ATE | 1MHz-100MHz | +13 | +/- 0.75 max | ||
NW300M-ATE | 1MHz-300MHz | +10 | +/- 1.0 max | ||
NW500M-ATE | 1MHz-500MHz | +10 | +/- 1.0 max | ||
NW1G-ATE | 1MHz-1GHz | +10 | +/- 1.5 max | ||
NW1.5G-ATE | 1MHz-1.5GHz | +10 | +/- 1.5 max | ||
NW2G-ATE | 1MHz-2GHz | 0 | +/- 2.0 max | ||
NW3G-ATE | 10MHz-3GHz | 0 | +/- 2.5 max | ||
NW4G-ATE | 10MHz-4GHz | -10 | +/- 2.5 max | ||
NW6G-ATE | 10MHz-6GHz | -10 | +/- 2.5 max | ||
NW10G-ATE | 10MHz-10GHz | -10 | +/- 2.5max | ||
NW18G-ATE | 2GHz-18GHz | -14 | +/- 2.5max | NW40G-ATE | 2GHz-40GHz | -20 | +/- 4.0 max |